View T494E336K2R5AH7280_8978994.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t20 08_t494 ? 10/21/2016 1 benefts ? meets or exceeds eia standard 535baac ? tap ed and reeled per eia 481 ? symme trical, compliant terminations ? opt ional gold-plated terminations ? lase r-marked case ? 100 % surge current test on c, d, e, u, v, x sizes ? hal ogen-free epoxy ? capacitance va lues of 0. 1 f to 1, 000 f ? tol erances of 10% and 20% ? vol tage rating of 2.5 C 50 vdc ? ext ended range values ? low pr ofle ca se si zes ? roh s compliant and lead-free terminations ? operating te mperature ra nge of ?5 5?c to +1 25?c overview the kemet t494 series is a lower esr version of the popular t491 series, designed specifcally for toda ys highly automated surface mount pr ocesses and equipment. the t494 combines kemet s pro ven solid tantalum technology, acclaimed and respected thr oughout the world, with the latest in materials, processes and automation, resulting in unsurpassed total performance and value. this product meets or exceeds the requirements of eia standard 535baac. this series is classifed as msl (moisture sensitivity lev el) 1 under j std 020: unlimited foor life time at 30c/85% rh. the t494 standard terminations are av ailable in 100% matte tin and provide excellent wetting characteristics and compatibility with today's surface mount solder systems. tin/lead (sn/pb) terminations are available upon request for any part number. gold-plated terminations are also available for use with conductive epoxy attachment processes. standard packaging of these devices is tape and reel in accordance with eia 481. this system provides perfect compatibility with all tape-fed placement units. tantalum surface mount capacitors C low esr t494 series industrial grade mno 2 applications typical applications include decoupling and fltering in industrial and automotive end applications, such as dc/dc converters, por table electronics, telecommunications, and control units. environmental compliance rohs compliant (6/6) according to directive 2002/95/ec when ordered with 100% sn solder, gold plated or non-magnetic 100% sn solder. one world. one kemet
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t20 08_t494 ? 10/21/2016 2 2 k-sim for a detailed analysis of specifc part numbers, please visit ksim.kemet.com to access kemet's k-sim software. kemet k-sim is designed to simulate beha vior of components with respect to frequency, ambient temperature, and dc bias levels. ordering information t 494 t 336 m 004 a t capacitor class series case size capacitance code (p f) capacitance tolerance rated voltage (vdc) failure rate/ design termination fini sh packaging (c-spec) t = tantalum industrial C low esr a, b, c, d, e, s, t, u, v, x first tw o di gits rep resent si gnifcant fgu res. th ird di git spe cifes nu mber of zer os. k = 10% m = 20% 2r5 = 2.5 003 = 3 004 = 4 006 = 6.3 010 = 10 016 = 16 020 = 20 025 = 25 035 = 35 050 = 50 a = n/a t = 100% matte tin (sn) plated h = standard solder coated (snpb 5% pb minimum) g = gold plated (a, b, c, d, x only) n = non-magnetic 100% tin (sn) m = non-magnetic (snpb) blank = 7" reel 7280 = 13" reel performance characteristics item performance characteristics operating temperature ?55c to 12 5c rated capacitance range 0.1 C 1, 000 f at 12 0 hz /25c capacitance tolerance k tolerance (10%), m tolerance (20%) rated voltage range 2.5 C 50 v df (1 20 hz ) refer to pa rt nu mber el ectrical sp ecifcation ta ble esr ( 100 khz) refer to pa rt nu mber el ectrical sp ecifcation ta ble lea kage current 0. 01 cv ( a) at ra ted vo ltage af ter 5 mi nutes tantalum surface mount capacitors C low esr t494 series industrial grade mno 2
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t20 08_t494 ? 10/21/2016 3 3 qualifcation test condition characteristics endurance 85c at ra ted vo ltage, 2, 000 ho urs 125c at 2/ 3 ra ted vol tage, 2, 000 ho urs c/ c within 10% of initial value df within initial limits dcl within 1.25 x initial limit esr within initial limits storage life 125c at 0 vol ts, 2, 000 ho urs c/ c within 10% of initial value df within initial limits dcl within 1.25 x initial limit esr within initial limits thermal shock milCstdC202, method 107, condition b, mounted, ?55c to 12 5c, 1, 000 cy cles c/ c within 5% of initial value df within initial limits dcl within 1.25 x initial limit esr within initial limits temperature stability extreme temperature exposure at a succession of co ntinuous st eps at +2 5oc, ?55 oc, +2 5oc, +8 5oc, +1 25oc, +2 5oc. +25c ?55c +85c +125c c/ c il* 10% 10% 20% df il il 1.5 x il 1.5 x il dcl il n/a 10 x il 12 x il surge voltage 85c, 1. 32 x ra ted vol tage 1, 000 cy cles (125c, 1. 2 x ra ted vol tage). c/ c within 5% of initial value df within initial limits dcl within initial limits esr within initial limits mechanical shock/ vibration milCstdC202, method 213, condition i, 100 g peak milCstdC202, method 204, condition d, 10 hz to 2,000 hz, 20 g peak c/ c within 10% of initial value df within initial limits dcl within initial limits *il = initial limit tantalum surface mount capacitors C low esr t494 series industrial grade mno 2
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t20 08_t494 ? 10/21/2016 4 4 caacitace reec t494c4mt t494mt t494m2t capacitance vs. frequency 0.01 0.1 1 10 100 1,000 100 1,000 10,000 100,000 1,000,000 10,000,00 0 impedance, esr (ohms) frequency (hz) t494c476m006at_imp t494d337m010at_imp t494b106m020at_imp t494c476m006at_esr t494d337m010at_esr t494b106m020at_esr esr vs. frequency dimensions C millimeters (inches) metric will govern h x t b b g f e a l r p side view anode (+) end view bottom view cathode (-) end view w s s termination cutout at kemet's option, either end 'ewi7m^i 'sqtsrirx kemet eia l w h f 0 .1 (0.004) s b 0.15 (ref) 0.006 x (ref) p (ref) r (ref) t (ref) a (min) g (ref) e (ref) a 3216C18 3.20.2 (0.1260.008) 1.60.2 (0.0630.008) 1.60.2 (0.0630.008) 1.2 (0.047) 0.80 (0.032) +0.2 (0.008) /?0.3(0.011) 0.4 (0.016) 0.100.10 (0.0040.004) 0.4 (0.016) 0.4 (0.016) 0.13 (0.005) 1.2 (0.047) 1.1 (0.043) 1.3 (0.051) b 3528C21 3.50.2 (0.1380.008) 2.80.2 (0.1100.008) 1.90.2 (0.0750.008) 2.2 (0.087) 0.80 (0.032) +0.1 (0.004) /?0.3(0.011) 0.4 (0.016) 0.100.10 (0.0040.004) 0.5 (0.020) 1.0 (0.039) 0.13 (0.005) 1.9 (0.075) 1.8 (0.071) 2.2 (0.087) c 6032C28 6.00.3 (0.2360.012) 3.20.3 (0.1260.012) 2.50.3 (0.0980.012) 2.2 (0.087) 1.30 (0.051) 0.3 (0.011) 0.5 (0.020) 0.100.10 (0.0040.004) 0.9 (0.035) 1.0 (0.039) 0.13 (0.005) 2.9 (0.114) 2.8 (0.110) 2.4 (0.094) d 7343C31 7.30.3 (0.2870.012) 4.30.3 (0.1690.012) 2.80.3 (0.1100.012) 2.4 (0.094) 1.30 (0.051) 0.3 (0.011) 0.5 (0.020) 0.100.10 (0.0040.004) 0.9 (0.035) 1.0 (0.039) 0.13 (0.005) 3.6 (0.142) 3.5 (0.138) 3.5 (0.138) x 7343C 43 7.30.3 (0.2870.012) 4.30.3 (0.1690.012) 4.00.3 (0.1570.012) 2.4 (0.094) 1.30 (0.051) 0.3 (0.011) 0.5 (0.020) 0.100.10 (0.0040.004) 1.7 (0.067) 1.0 (0.039) 0.13 (0.005) 3.6 (0.142) 3.5 (0.138) 3.5 (0.138) e 7360-38 7.30.3 (0.2870.012) 6.00.3 (0.2360.012) 3.60.2 (0.1420.008) 4.1 (0.161) 1.30 (0.051) 0.3 (0.011) 0.5 (0.020) 0.100.10 (0.0040.004) n/a n/a 0.13 (0.005) 3.6 (0.142) 3.5 (0.138) 3.5 (0.138) s 3216C12 3.20.2 (0.1260.008) 1.60.2 (0.0630.008) 1.2 (0.047) 1.2 (0.047) 0.80 (0.032) +0.2 (0.008) /?0.3(0.011) n/a 0.05 (0.002) n/a n/a 0.13 (0.005) 1.2 (0.047) 1.1 (0.043) 1.3 (0.051) t 3528C12 3.50.2 (0.1380.008) 2.80.2 (0.1100.008) 1.2 (0.047) 2.2 (0.087) 0.80 (0.032) +0.1 (0.004) /?0.3(0.011) n/a 0.05 (0.002) n/a n/a 0.13 (0.005) 1.9 (0.075) 1.8 (0.071) 2.2 (0.087) u 6032C15 6.00.3 (0.2360.012) 3.20.2 (0.1100.008) 1.5 (0.059) 2.2 (0.087) 1.30 (0.051) 0.3 (0.011) n/a 0.05 (0.002) n/a n/a 0.13 (0.005) 2.9 (0.114) 2.8 (0.110) 2.4 (0.094) v 7343-20 7.30.3 (0.2870.012) 4.30.3 (0.1690.012) 2.0 (0.079) 2.4 (0.094) 1.30 (0.051) 0.3 (0.011) n/a 0.05 (0.002) n/a n/a 0.13 (0.005) 3.6 (0.142) 3.5 (0.138) 3.5 (0.138) notes: (ref) C dimensions provided for reference only. for low profle cases, no dimensions are provided for b, p or r because these cases do not have a bevel or a notch. tantalum surface mount capacitors ? low esr t494 series industrial grade mno 2 electrical characteristics
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t20 08_t494 ? 10/21/2016 5 5 table 1 C ratings & part number reference (1) to complete kemet part number, insert m for 20% or k for 10%. designates capacitance tolerance. (2) to complete kemet part number, insert t = 100% matte tin (sn) plated, g = gold plated, h = standard solder coated (snpb 5% pb minimum). designates termination fnish. refer to ordering information for additional detail. higher voltage ratings and tighter tolerance product including esr may be substituted within the same size at kemet's option. voltage substitution will be marked with the higher voltage rating. substitutions can include better than series. rated voltage rated cap case code/ case size kemet part number dc leakage df esr maximum allowable ripple current maximum operating temp msl vdc at 85oc f kemet/eia (see below for part options) a at 20oc max/5 min % at 20oc 120 hz max at 20oc 100 khz max ma at 25oc 100 khz ma at 85oc 100 khz ma at 125oc 100 khz oc refow temp 260oc 2.5 100 t/3528-12 t494t107(1)2r5a(2) 2.5 24.0 3.5 141 127 56 125 1 2.5 220 d/7343-31 t494d227(1)2r5a(2) 5.5 8.0 0.2 866 779 346 125 1 3 33 a/3216-18 t494a336(1)003a(2) 1.0 6.0 2.0 194 175 78 125 1 4 3.3 a/3216-18 t494a335(1)004a(2) 0.5 6.0 4.0 137 123 55 125 1 4 4.7 a/3216-18 t494a475(1)004a(2) 0.5 6.0 3.5 146 131 58 125 1 4 6.8 a/3216-18 t494a685(1)004a(2) 0.5 6.0 3.0 158 142 63 125 1 4 6.8 s/3216-12 t494s685(1)004a(2) 0.5 6.0 7.0 93 84 37 125 1 4 10 b/3528-21 t494b106(1)004a(2) 0.5 6.0 1.2 266 239 106 125 1 4 10 a/3216-18 t494a106(1)004a(2) 0.5 6.0 2.0 194 175 78 125 1 4 10 s/3216-12 t494s106(1)004a(2) 0.5 6.0 9.0 82 74 33 125 1 4 15 b/3528-21 t494b156(1)004a(2) 0.6 6.0 1.2 266 239 106 125 1 4 15 a/3216-18 t494a156(1)004a(2) 0.6 6.0 1.5 224 202 90 125 1 4 15 t/3528-12 t494t156(1)004a(2) 0.6 6.0 2.0 187 168 75 125 1 4 15 s/3216-12 t494s156(m)004a(2) 0.6 10.0 9.0 82 74 33 125 1 4 22 c/6032-28 t494c226(1)004a(2) 0.9 6.0 0.5 469 422 188 125 1 4 22 b/3528-21 t494b226(1)004a(2) 0.9 6.0 0.6 376 338 150 125 1 4 22 a/3216-18 t494a226(1)004a(2) 0.9 6.0 1.5 224 202 90 125 1 4 22 s/3216-12 t494s226(m)004a(2) 0.9 10.0 8.0 87 78 35 125 1 4 22 t/3528-12 t494t226(1)004a(2) 0.9 6.0 2.5 167 150 67 125 1 4 33 c/6032-28 t494c336(1)004a(2) 1.3 6.0 0.5 469 422 188 125 1 4 33 u/6032-15 t494u336(1)004a(2) 1.3 6.0 0.6 387 348 155 125 1 4 33 b/3528-21 t494b336(1)004a(2) 1.3 6.0 0.5 412 371 165 125 1 4 33 a/3216-18 t494a336(1)004a(2) 1.3 6.0 3.0 158 142 63 125 1 4 33 t/3528-12 t494t336(m)004a(2) 1.3 8.0 3.5 141 127 56 125 1 4 47 c/6032-28 t494c476(1)004a(2) 1.9 6.0 0.5 469 422 188 125 1 4 47 u/6032-15 t494u476(1)004a(2) 1.9 6.0 0.6 387 348 155 125 1 4 47 b/3528-21 t494b476(1)004a(2) 1.9 6.0 0.5 412 371 165 125 1 4 47 a/3216-18 t494a476(m)004a(2) 1.9 12.0 2.0 194 175 78 125 1 4 47 t/3528-12 t494t476(m)004a(2) 1.9 12.0 4.0 132 119 53 125 1 4 68 d/7343-31 t494d686(1)004a(2) 2.7 6.0 0.20 866 779 346 125 1 4 68 c/6032-28 t494c686(1)004a(2) 2.7 6.0 0.25 663 597 265 125 1 4 68 u/6032-15 t494u686(1)004a(2) 2.7 6.0 0.60 387 348 155 125 1 4 68 b/3528-21 t494b686(1)004a(2) 2.7 6.0 2.00 206 185 82 125 1 4 68 a/ 3 216-18 t494a686(1)004a(2) 2.7 30.0 3.00 158 142 63 125 1 4 100 d/7343-31 t494d107(1)004a(2) 4.0 8.0 0.20 866 779 346 125 1 4 100 c/6032-28 t494c107(1)004a(2) 4.0 8.0 0.20 742 668 297 125 1 4 100 u/6032-15 t494u107(1)004a(2) 4.0 10.0 1.00 300 270 120 125 1 4 100 b/3528-21 t494b107(m)004a(2) 4.0 8.0 0.65 362 326 145 125 1 4 100 a/3216-18 t494a107(m)004a(2) 4.0 30.0 3.00 158 142 63 125 1 4 100 t/3528-12 t494t107(m)004a(2) 4.0 30.0 4.50 125 113 50 125 1 4 150 d/7343-31 t494d157(1)004a(2) 6.0 8.0 0.15 1000 900 400 125 1 4 150 v/7343-20 t494v157(1)004a(2) 6.0 8.0 0.20 791 712 316 125 1 4 150 c/6032-28 t494c157(1)004a(2) 6.0 8.0 0.30 606 545 242 125 1 4 150 b/3528-21 t494b157(1)004a(2) 6.0 12.0 1.00 292 263 117 125 1 4 220 v/7343-20 t494v227(1)004a(2) 8.8 8.0 0.30 645 581 258 125 1 vdc at 85oc f kemet/eia (see below for part options) a at 20oc max/5 min % at 20oc 120 hz max at 20oc 100 khz max ma at 25oc 100 khz ma at 85oc 100 khz ma at 125oc 100 khz oc refow temp 260oc rated voltage rated cap case code/ case size kemet part number dc leakage df esr maximum allowable ripple current maximum operating temp msl tantalum surface mount capacitors C low esr t494 series industrial grade mno 2
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t20 08_t494 ? 10/21/2016 6 6 table 1 C ratings & part number reference cont'd (1) to complete kemet part number, insert m for 20% or k for 10%. designates capacitance tolerance. (2) to complete kemet part number, insert t = 100% matte tin (sn) plated, g = gold plated, h = standard solder coated (snpb 5% pb minimum). designates termination fnish. refer to ordering information for additional detail. higher voltage ratings and tighter tolerance product including esr may be substituted within the same size at kemet's option. voltage substitution will be marked with the higher voltage rating. substitutions can include better than series. rated voltage rated cap case code/ case size kemet part number dc leakage df esr maximum allowable ripple current maximum operating temp msl vdc at 85oc f kemet/eia (see below for part options) a at 20oc max/5 min % at 20oc 120 hz max at 20oc 100 khz max ma at 25oc 100 khz ma at 85oc 100 khz ma at 125oc 100 khz oc refow temp 260oc 4 220 b/3528-21 t494b227(m)004a(2) 8.8 8.0 0.40 461 415 184 125 1 4 330 d/7343-31 t494d337(1)004a(2) 13.2 8.0 0.15 1000 900 400 125 1 4 330 c/6032-28 t494c337(1)004a(2) 13.2 10.0 0.09 1106 995 442 125 1 4 330 v/7343-20 t494v337(1)004a(2) 13.2 12.0 0.30 645 581 258 125 1 4 470 x/7343-43 t494x477(1)004a(2) 18.8 8.0 0.15 1049 944 420 125 1 4 470 d/7343-31 t494d477(1)004a(2) 18.8 8.0 0.15 1000 900 400 125 1 4 680 x/7343-43 t494x687(m)004a(2) 27.2 12.0 0.10 1285 1157 514 125 1 4 680 d/7343-31 t494d687(m)004a(2) 27.2 12.0 0.15 1000 900 400 125 1 4 1000 x/7343-43 t494x108(1)004a(2) 40.0 12.0 0.10 1285 1157 514 125 1 4 1000 e/7360-38 t494e108(m)004a(2) 40.0 15.0 0.08 1581 1423 632 125 1 6.3 2.2 a/3216-18 t494a225(1)006a(2) 0.5 6.0 6.0 112 101 45 125 1 6.3 3.3 a/3216-18 t494a335(1)006a(2) 0.5 6.0 6.0 112 101 45 125 1 6.3 4.7 a/3216-18 t494a475(1)006a(2) 0.5 6.0 3.5 146 131 58 125 1 6.3 4.7 s/3216-12 t494s475(1)006a(2) 0.5 6.0 8.0 87 78 35 125 1 6.3 6.8 b/3528-21 t494b685(1)006a(2) 0.5 6.0 1.2 266 239 106 125 1 6.3 6.8 a/3216-18 t494a685(1)006a(2) 0.5 6.0 2.0 194 175 78 125 1 6.3 6.8 s/3216-12 t494s685(1)006a(2) 0.5 6.0 9.0 82 74 33 125 1 6.3 10 b/3528-21 t494b106(1)006a(2) 0.6 6.0 1.0 292 263 117 125 1 6.3 10 a/3216-18 t494a106(1)006a(2) 0.6 6.0 2.0 194 175 78 125 1 6.3 10 t/3528-12 t494t106(1)006a(2) 0.6 6.0 1.2 242 218 97 125 1 6.3 10 s/3216-12 t494s106(m)006a(2) 0.6 10.0 9.0 82 74 33 125 1 6.3 15 c/6032-28 t494c156(1)006a(2) 0.9 6.0 0.6 428 385 171 125 1 6.3 15 b/3528-21 t494b156(1)006a(2) 0.9 6.0 0.7 348 313 139 125 1 6.3 15 a/3216-18 t494a156(1)006a(2) 0.9 6.0 2.0 194 175 78 125 1 6.3 15 t/3528-12 t494t156(1)006a(2) 0.9 6.0 2.5 167 150 67 125 1 6.3 15 s/3216-12 t494s156(m)006a(2) 0.9 10.0 10.0 77 69 31 125 1 6.3 22 c/6032-28 t494c226(1)006a(2) 1.4 6.0 0.5 469 422 188 125 1 6.3 22 u/6032-15 t494u226(1)006a(2) 1.4 6.0 0.8 335 302 134 125 1 6.3 22 b/3528-21 t494b226(1)006a(2) 1.4 6.0 0.6 376 338 150 125 1 6.3 22 a/3216-18 t494a226(1)006a(2) 1.4 6.0 3.0 158 142 63 125 1 6.3 22 t/3528-12 t494t226(m)006a(2) 1.4 8.0 3.5 141 127 56 125 1 6.3 33 c/6032-28 t494c336(1)006a(2) 2.1 6.0 0.3 606 545 242 125 1 6.3 33 u/6032-15 t494u336(1)006a(2) 2.1 6.0 0.6 387 348 155 125 1 6.3 33 b/35 2 8-21 t494b336(1)006a(2) 2.1 6.0 0.6 376 338 150 125 1 6.3 33 a/3216-18 t494a336(1)006a(2) 2.1 12.0 2.0 194 175 78 125 1 6.3 33 t/3528-12 t494t336(m)006a(2) 2.1 12.0 4.0 132 119 53 125 1 6.3 47 d/7343-31 t494d476(1)006a(2) 3.0 6.0 0.22 826 743 330 125 1 6.3 47 c/6032-28 t494c476(1)006a(2) 3.0 6.0 0.25 663 597 265 125 1 6.3 47 u/6032-15 t494u476(1)006a(2) 3.0 6.0 0.60 387 348 155 125 1 6.3 47 b/3528-21 t494b476(1)006a(2) 3.0 6.0 0.50 412 371 165 125 1 6.3 47 a/3216-18 t494a476(m)006a(2) 3.0 12.0 2.50 173 156 69 125 1 6.3 47 t/3528-12 t494t476(1)006a(2) 3.0 24.0 4.00 132 119 53 125 1 6.3 68 d/7343-31 t494d686(1)006a(2) 4.3 6.0 0.20 866 779 346 125 1 6.3 68 c/6032-28 t494c686(1)006a(2) 4.3 6.0 0.20 742 668 297 125 1 6.3 68 u/6032-15 t494u686(1)006a(2) 4.3 10.0 1.00 300 270 120 125 1 vdc at 85oc f kemet/eia (see below for part options) a at 20oc max/5 min % at 20oc 120 hz max at 20oc 100 khz max ma at 25oc 100 khz ma at 85oc 100 khz ma at 125oc 100 khz oc refow temp 260oc rated voltage rated cap case code/ case size kemet part number dc leakage df esr maximum allowable ripple current maximum operating temp msl tantalum surface mount capacitors C low esr t494 series industrial grade mno 2
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t20 08_t494 ? 10/21/2016 7 7 table 1 C ratings & part number reference cont'd (1) to complete kemet part number, insert m for 20% or k for 10%. designates capacitance tolerance. (2) to complete kemet part number, insert t = 100% matte tin (sn) plated, g = gold plated, h = standard solder coated (snpb 5% pb minimum). designates termination fnish. refer to ordering information for additional detail. higher voltage ratings and tighter tolerance product including esr may be substituted within the same size at kemet's option. voltage substitution will be marked with the higher voltage rating. substitutions can include better than series. rated voltage rated cap case code/ case size kemet part number dc leakage df esr maximum allowable ripple current maximum operating temp msl vdc at 85oc f kemet/eia (see below for part options) a at 20oc max/5 min % at 20oc 120 hz max at 20oc 100 khz max ma at 25oc 100 khz ma at 85oc 100 khz ma at 125oc 100 khz oc refow temp 260oc 6.3 68 b/3528-21 t494b686(m)006a(2) 4.3 8.0 0.65 362 326 145 125 1 6.3 68 a/3216-18 t494a686(1)006a(2) 4.3 30.0 3.00 158 142 63 125 1 6.3 100 d/7343-31 t494d107(1)006a(2) 6.3 8.0 0.15 1000 900 400 125 1 6.3 100 v/7343-20 t494v107(1)006a(2) 6.3 8.0 0.20 791 712 316 125 1 6.3 100 c/6032-28 t494c107(1)006a(2) 6.3 8.0 0.30 606 545 242 125 1 6.3 100 u/6032-15 t494u107(m)006a(2) 6.3 10.0 1.20 274 247 110 125 1 6.3 100 b/3528-21 t494b107(1)006a(2) 6.3 15.0 1.50 238 214 95 125 1 6.3 150 b/3528-21 t494b157(1)006a(2) 9.5 15.0 2.25 194 175 78 125 1 6.3 150 d/7343-31 t494d157(1)006a(2) 9.5 8.0 0.15 1000 900 400 125 1 6.3 150 c/6032-28 t494c157(m)006a(2) 9.5 8.0 0.30 606 545 242 125 1 6.3 150 v/7343-20 t494v157(1)006a(2) 9.5 8.0 0.30 645 581 258 125 1 6.3 220 x/7343-43 t494x227(1)006a(2) 13.9 8.0 0.15 1049 944 420 125 1 6.3 220 d/7343-31 t494d227(1)006a(2) 13.9 8.0 0.15 1000 900 400 125 1 6.3 220 c/6032-28 t494c227(m)006a(2) 13.9 10.0 0.30 606 545 242 125 1 6.3 220 v/7343-20 t494v227(m)006a(2) 13.9 12.0 0.30 645 581 258 125 1 6.3 330 x/7343-43 t494x337(1)006a(2) 20.8 8.0 0.15 1049 944 420 125 1 6.3 330 d/7343-31 t494d337(1)006a(2) 20.8 8.0 0.15 1000 900 400 125 1 6.3 330 e/7360-38 t494e337(1)006a(2) 20.8 8.0 0.25 894 805 358 125 1 6.3 470 x/7343-43 t494x477(1)006a(2) 29.6 10.0 0.10 1285 1157 514 125 1 6.3 470 d/7343-31 t494d477(m)006a(2) 29.6 12.0 0.15 1000 900 400 125 1 6.3 470 e/7360-38 t494e477(1)006a(2) 29.6 10.0 0.20 1000 900 400 125 1 6.3 680 e/7360-38 t494e687(m)006a(2) 42.8 12.0 0.10 1414 1273 566 125 1 6.3 680 x/7343-43 t494x687(1)006a(2) 42.8 12.0 0.10 1285 1157 514 125 1 10 1.5 a/3216-18 t494a155(1)010a(2) 0.5 6.0 6.0 112 101 45 125 1 10 2.2 b/3528-21 t494b225(1)010a(2) 0.5 6.0 1.5 238 214 95 125 1 10 2.2 a/3216-18 t494a225(1)010a(2) 0.5 6.0 6.0 112 101 45 125 1 10 3.3 a/3216-18 t494a335(1)010a(2) 0.5 6.0 4.0 137 123 55 125 1 10 3.3 s/3216-12 t494s335(1)010a(2) 0.5 6.0 9.0 82 74 33 125 1 10 4.7 b/3528-21 t494b475(1)010a(2) 0.5 6.0 1.5 238 214 95 125 1 10 4.7 a/3216-18 t494a475(1)010a(2) 0.5 6.0 3.0 158 142 63 125 1 10 4.7 s/3216-12 t494s475(1)010a(2) 0.5 6.0 9.0 82 74 33 125 1 10 6.8 b/3528-21 t494b685(1)010a(2) 0.7 6.0 1.2 266 239 106 125 1 10 6.8 a/3216-18 t494a685(1)010a(2) 0.7 6.0 3.0 158 142 63 125 1 10 6.8 t/ 3 528-12 t494t685(1)010a(2) 0.7 6.0 2.0 187 168 75 125 1 10 6.8 s/3216-12 t494s685(m)010a(2) 0.7 10.0 9.0 82 74 33 125 1 10 10 c/6032-28 t494c106(1)010a(2) 1.0 6.0 0.6 428 385 171 125 1 10 10 b/3528-21 t494b106(1)010a(2) 1.0 6.0 0.8 326 293 130 125 1 10 10 a/3216-18 t494a106(1)010a(2) 1.0 6.0 1.8 204 184 82 125 1 10 10 t/3528-12 t494t106(1)010a(2) 1.0 6.0 3.5 141 127 56 125 1 10 10 s/3216-12 t494s106(m)010a(2) 1.0 10.0 12.0 71 64 28 125 1 10 15 c/6032-28 t494c156(1)010a(2) 1.5 6.0 0.5 469 422 188 125 1 10 15 u/6032-15 t494u156(1)010a(2) 1.5 6.0 0.8 335 302 134 125 1 10 15 b/3528-21 t494b156(1)010a(2) 1.5 6.0 0.7 348 313 139 125 1 10 15 a/3216-18 t494a156(1)010a(2) 1.5 6.0 3.2 153 138 61 125 1 10 15 t/3528-12 t494t156(m)010a(2) 1.5 8.0 3.5 141 127 56 125 1 vdc at 85oc f kemet/eia (see below for part options) a at 20oc max/5 min % at 20oc 120 hz max at 20oc 100 khz max ma at 25oc 100 khz ma at 85oc 100 khz ma at 125oc 100 khz oc refow temp 260oc rated voltage rated cap case code/ case size kemet part number dc leakage df esr maximum allowable ripple current maximum operating temp msl tantalum surface mount capacitors C low esr t494 series industrial grade mno 2
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t20 08_t494 ? 10/21/2016 8 8 table 1 C ratings & part number reference cont'd (1) to complete kemet part number, insert m for 20% or k for 10%. designates capacitance tolerance. (2) to complete kemet part number, insert t = 100% matte tin (sn) plated, g = gold plated, h = standard solder coated (snpb 5% pb minimum). designates termination fnish. refer to ordering information for additional detail. higher voltage ratings and tighter tolerance product including esr may be substituted within the same size at kemet's option. voltage substitution will be marked with the higher voltage rating. substitutions can include better than series. rated voltage rated cap case code/ case size kemet part number dc leakage df esr maximum allowable ripple current maximum operating temp msl vdc at 85oc f kemet/eia (see below for part options) a at 20oc max/5 min % at 20oc 120 hz max at 20oc 100 khz max ma at 25oc 100 khz ma at 85oc 100 khz ma at 125oc 100 khz oc refow temp 260oc 10 22 c/6032-28 t494c226(1)010a(2) 2.2 6.0 0.4 524 472 210 125 1 10 22 u/6032-15 t494u226(1)010a(2) 2.2 6.0 0.8 335 302 134 125 1 10 22 b/3528-21 t494b226(1)010a(2) 2.2 6.0 0.7 348 313 139 125 1 10 22 a/3216-18 t494a226(m)010a(2) 2.2 10.0 4.5 129 116 52 125 1 10 22 t/3528-12 t494t226(m)010a(2) 2.2 12.0 6.0 108 97 43 125 1 10 33 d/7343-31 t494d336(1)010a(2) 3.3 6.0 0.25 775 698 310 125 1 10 33 v/7343-20 t494v336(1)010a(2) 3.3 6.0 0.30 645 581 258 125 1 10 33 c/6032-28 t494c336(1)010a(2) 3.3 6.0 0.30 606 545 242 125 1 10 33 u/6032-15 t494u336(1)010a(2) 3.3 6.0 0.60 387 348 155 125 1 10 33 t/3528-12 t494t336(1)010a(2) 3.3 24.0 3.75 137 123 55 125 1 10 33 b/3528-21 t494b336(1)010a(2) 3.3 6.0 1.40 246 221 98 125 1 10 33 a/3216-18 t494a336(1)010a(2) 3.3 15.0 4.00 137 123 55 125 1 10 47 d/7343-31 t494d476(1)010a(2) 4.7 6.0 0.22 826 743 330 125 1 10 47 v/7343-20 t494v476(1)010a(2) 4.7 6.0 0.30 645 581 258 125 1 10 47 c/6032-28 t494c476(1)010a(2) 4.7 6.0 0.30 606 545 242 125 1 10 47 u/6032-15 t494u476(1)010a(2) 4.7 10.0 1.20 274 247 110 125 1 10 47 b/3528-21 t494b476(1)010a(2) 4.7 8.0 0.65 362 326 145 125 1 10 68 d/7343-31 t494d686(1)010a(2) 6.8 6.0 0.20 866 779 346 125 1 10 68 c/6032-28 t494c686(1)010a(2) 6.8 6.0 0.30 606 545 242 125 1 10 68 v/7343-20 t494v686(1)010a(2) 6.8 6.0 0.30 645 581 258 125 1 10 68 u/6032-15 t494u686(m)010a(2) 6.8 10.0 1.20 274 247 110 125 1 10 68 b/3528-21 t494b686(m)010a(2) 6.8 10.0 1.50 238 214 95 125 1 10 100 d/7343-31 t494d107(1)010a(2) 10.0 8.0 0.15 1000 900 400 125 1 10 100 c/6032-28 t494c107(1)010a(2) 10.0 8.0 0.20 742 668 297 125 1 10 100 v/7343-20 t494v107(1)010a(2) 10.0 8.0 0.40 559 503 224 125 1 10 150 x/7343-43 t494x157(1)010a(2) 15.0 8.0 0.15 1049 944 420 125 1 10 150 d/7343-31 t494d157(1)010a(2) 15.0 8.0 0.15 1000 900 400 125 1 10 150 c/6032-28 t494c157(1)010a(2) 15.0 10.0 0.70 396 356 158 125 1 10 150 v/7343-20 t494v157(m)010a(2) 15.0 8.0 0.30 645 581 258 125 1 10 220 x/7343-43 t494x227(1)010a(2) 22.0 8.0 0.15 1049 944 420 125 1 10 220 d/7343-31 t494d227(1)010a(2) 22.0 8.0 0.15 1000 900 400 125 1 10 330 x/7343-43 t494x337(1)010a(2) 33.0 10.0 0.10 1285 1157 514 125 1 10 330 d/7343-31 t494d337(1)010a(2) 33.0 10.0 0.15 1000 900 400 125 1 10 330 e/ 73 60-38 t494e337(1)010a(2) 33.0 10.0 0.25 894 805 358 125 1 10 470 x/7343-43 t494x477(1)010a(2) 47.0 10.0 0.10 1285 1157 514 125 1 10 470 e/7360-38 t494e477(m)010a(2) 47.0 12.0 0.10 1414 1273 566 125 1 16 1 a/3216-18 t494a105(1)016a(2) 0.5 4.0 6.0 112 101 45 125 1 16 1.5 a/3216-18 t494a155(1)016a(2) 0.5 6.0 6.0 112 101 45 125 1 16 2.2 a/3216-18 t494a225(1)016a(2) 0.5 6.0 4.0 137 123 55 125 1 16 2.2 s/3216-12 t494s225(1)016a(2) 0.5 6.0 10.0 77 69 31 125 1 16 3.3 b/3528-21 t494b335(1)016a(2) 0.5 6.0 2.0 206 185 82 125 1 16 3.3 a/3216-18 t494a335(1)016a(2) 0.5 6.0 4.0 137 123 55 125 1 16 4.7 b/3528-21 t494b475(1)016a(2) 0.8 6.0 1.5 238 214 95 125 1 16 4.7 a/3216-18 t494a475(1)016a(2) 0.8 6.0 3.0 158 142 63 125 1 16 4.7 t/3528-12 t494t475(1)016a(2) 0.8 6.0 3.0 153 138 61 125 1 vdc at 85oc f kemet/eia (see below for part options) a at 20oc max/5 min % at 20oc 120 hz max at 20oc 100 khz max ma at 25oc 100 khz ma at 85oc 100 khz ma at 125oc 100 khz oc refow temp 260oc rated voltage rated cap case code/ case size kemet part number dc leakage df esr maximum allowable ripple current maximum operating temp msl tantalum surface mount capacitors C low esr t494 series industrial grade mno 2
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t20 08_t494 ? 10/21/2016 9 9 table 1 C ratings & part number reference cont'd (1) to complete kemet part number, insert m for 20% or k for 10%. designates capacitance tolerance. (2) to complete kemet part number, insert t = 100% matte tin (sn) plated, g = gold plated, h = standard solder coated (snpb 5% pb minimum). designates termination fnish. refer to ordering information for additional detail. higher voltage ratings and tighter tolerance product including esr may be substituted within the same size at kemet's option. voltage substitution will be marked with the higher voltage rating. substitutions can include better than series. rated voltage rated cap case code/ case size kemet part number dc leakage df esr maximum allowable ripple current maximum operating temp msl vdc at 85oc f kemet/eia (see below for part options) a at 20oc max/5 min % at 20oc 120 hz max at 20oc 100 khz max ma at 25oc 100 khz ma at 85oc 100 khz ma at 125oc 100 khz oc refow temp 260oc 16 6.8 c/6032-28 t494c685(1)016a(2) 1.1 6.0 0.8 371 334 148 125 1 16 6.8 b/3528-21 t494b685(1)016a(2) 1.1 6.0 1.2 266 239 106 125 1 16 6.8 a/3216-18 t494a685(1)016a(2) 1.1 6.0 3.0 158 142 63 125 1 16 10 c/6032-28 t494c106(1)016a(2) 1.6 6.0 0.6 428 385 171 125 1 16 10 u/6032-15 t494u106(1)016a(2) 1.6 6.0 1.0 300 270 120 125 1 16 10 b/3528-21 t494b106(1)016a(2) 1.6 6.0 0.8 326 293 130 125 1 16 10 a/3216-18 t494a106(1)016a(2) 1.6 8.0 3.0 158 142 63 125 1 16 10 t/3528-12 t494t106(1)016a(2) 1.6 8.0 6.0 108 97 43 125 1 16 15 c/6032-28 t494c156(1)016a(2) 2.4 6.0 0.4 524 472 210 125 1 16 15 u/6032-15 t494u156(1)016a(2) 2.4 6.0 0.8 335 302 134 125 1 16 15 b/3528-21 t494b156(1)016a(2) 2.4 6.0 0.8 326 293 130 125 1 16 22 d/7343-31 t494d226(1)016a(2) 3.5 6.0 0.25 775 698 310 125 1 16 22 c/6032-28 t494c226(1)016a(2) 3.5 6.0 0.35 561 505 224 125 1 16 22 u/6032-15 t494u226(1)016a(2) 3.5 10.0 1.80 224 202 90 125 1 16 22 b/3528-21 t494b226(1)016a(2) 3.5 6.0 1.00 292 263 117 125 1 16 33 d/7343-31 t494d336(1)016a(2) 5.3 6.0 0.25 775 698 310 125 1 16 33 c/6032-28 t494c336(1)016a(2) 5.3 6.0 0.30 606 545 242 125 1 16 33 u/6032-15 t494u336(1)016a(2) 5.3 12.0 2.20 202 182 81 125 1 16 33 b/3528-21 t494b336(1)016a(2) 5.3 8.0 1.20 266 239 106 125 1 16 47 d/7343-31 t494d476(1)016a(2) 7.5 6.0 0.2 866 779 346 125 1 16 47 v/7343-20 t494v476(1)016a(2) 7.5 6.0 0.3 645 581 258 125 1 16 47 c/6032-28 t494c476(1)016a(2) 7.5 6.0 0.5 469 422 188 125 1 16 68 d/7343-31 t494d686(1)016a(2) 10.9 6.0 0.15 1000 900 400 125 1 16 68 v/7343-20 t494v686(1)016a(2) 10.9 6.0 0.5 500 450 200 125 1 16 68 c/6032-28 t494c686(1)016a(2) 10.9 12.0 1.0 332 299 133 125 1 16 100 x/7343-43 t494x107(1)016a(2) 16.0 8.0 0.15 1049 944 420 125 1 16 100 d/7343-31 t494d107(1)016a(2) 16.0 8.0 0.15 1000 900 400 125 1 16 100 v/7343-20 t494v107(1)016a(2) 16.0 12.0 0.5 500 450 200 125 1 16 100 c/6032-28 t494c107(1)016a(2) 16.0 10.0 0.75 383 345 153 125 1 16 150 x/7343-43 t494x157(1)016a(2) 24.0 8.0 0.15 1049 944 420 125 1 16 150 d/7343-31 t494d157(1)016a(2) 24.0 12.0 0.4 612 551 245 125 1 16 220 x/7343-43 t494x227(1)016a(2) 35.2 10.0 0.4 642 578 257 125 1 16 220 e/7360-38 t494e227(1)016a(2) 35.2 7.2 0.5 632 569 253 125 1 20 0.68 a/ 3 216-18 t494a684(1)020a(2) 0.5 4.0 8.0 97 87 39 125 1 20 1 a/3216-18 t494a105(1)020a(2) 0.5 4.0 5.5 117 105 47 125 1 20 1 s/3216-12 t494s105(1)020a(2) 0.5 6.0 10.0 77 69 31 125 1 20 1.5 a/3216-18 t494a155(1)020a(2) 0.5 6.0 4.5 129 116 52 125 1 20 1.5 s/3216-12 t494s155(1)020a(2) 0.5 6.0 9.0 82 74 33 125 1 20 2.2 b/3528-21 t494b225(1)020a(2) 0.5 6.0 1.5 238 214 95 125 1 20 2.2 a/3216-18 t494a225(1)020a(2) 0.5 6.0 4.0 137 123 55 125 1 20 3.3 b/3528-21 t494b335(1)020a(2) 0.7 6.0 1.3 256 230 102 125 1 20 3.3 a/3216-18 t494a335(1)020a(2) 0.7 6.0 4.0 137 123 55 125 1 20 3.3 t/3528-12 t494t335(1)020a(2) 0.7 6.0 4.0 132 119 53 125 1 20 4.7 c/6032-28 t494c475(1)020a(2) 0.9 6.0 0.6 428 385 171 125 1 20 4.7 b/3528-21 t494b475(1)020a(2) 0.9 6.0 1.0 292 263 117 125 1 vdc at 85oc f kemet/eia (see below for part options) a at 20oc max/5 min % at 20oc 120 hz max at 20oc 100 khz max ma at 25oc 100 khz ma at 85oc 100 khz ma at 125oc 100 khz oc refow temp 260oc rated voltage rated cap case code/ case size kemet part number dc leakage df esr maximum allowable ripple current maximum operating temp msl tantalum surface mount capacitors C low esr t494 series industrial grade mno 2
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t20 08_t494 ? 10/21/2016 10 10 table 1 C ratings & part number reference cont'd (1) to complete kemet part number, insert m for 20% or k for 10%. designates capacitance tolerance. (2) to complete kemet part number, insert t = 100% matte tin (sn) plated, g = gold plated, h = standard solder coated (snpb 5% pb minimum). designates termination fnish. refer to ordering information for additional detail. higher voltage ratings and tighter tolerance product including esr may be substituted within the same size at kemet's option. voltage substitution will be marked with the higher voltage rating. substitutions can include better than series. rated voltage rated cap case code/ case size kemet part number dc leakage df esr maximum allowable ripple current maximum operating temp msl vdc at 85oc f kemet/eia (see below for part options) a at 20oc max/5 min % at 20oc 120 hz max at 20oc 100 khz max ma at 25oc 100 khz ma at 85oc 100 khz ma at 125oc 100 khz oc refow temp 260oc 20 4.7 a/3216-18 t494a475(1)020a(2) 0.9 6.0 3.0 158 142 63 125 1 20 6.8 c/6032-28 t494c685(1)020a(2) 1.4 6.0 0.6 428 385 171 125 1 20 6.8 u/6032-15 t494u685(1)020a(2) 1.4 6.0 1.4 254 229 102 125 1 20 6.8 b/3528-21 t494b685(1)020a(2) 1.4 6.0 1.0 292 263 117 125 1 20 6.8 a/3216-18 t494a685(m)020a(2) 1.4 8.0 3.0 158 142 63 125 1 20 10 c/6032-28 t494c106(1)020a(2) 2.0 6.0 0.5 469 422 188 125 1 20 10 u/6032-15 t494u106(1)020a(2) 2.0 6.0 0.8 335 302 134 125 1 20 10 b/3528-21 t494b106(1)020a(2) 2.0 6.0 1.0 292 263 117 125 1 20 10 a/3216-18 t494a106(m)020a(2) 2.0 10.0 3.0 158 142 63 125 1 20 15 d/7343-31 t494d156(1)020a(2) 3.0 6.0 0.35 655 590 262 125 1 20 15 c/6032-28 t494c156(1)020a(2) 3.0 6.0 0.40 524 472 210 125 1 20 22 d/7343-31 t494d226(1)020a(2) 4.4 6.0 0.3 707 636 283 125 1 20 22 v/7343-20 t494v226(1)020a(2) 4.4 6.0 0.4 559 503 224 125 1 20 22 c/6032-28 t494c226(1)020a(2) 4.4 6.0 0.4 524 472 210 125 1 20 22 b/3528-21 t494b226(1)020a(2) 4.4 8.0 3.0 168 151 67 125 1 20 33 d/7343-31 t494d336(1)020a(2) 6.6 6.0 0.25 775 698 310 125 1 20 33 c/6032-28 t494c336(m)020a(2) 6.6 6.0 0.40 524 472 210 125 1 20 33 v/7343-20 t494v336(1)020a(2) 6.6 8.0 0.40 559 503 224 125 1 20 33 b/3528-21 t494b336(m)020a(2) 6.6 10.0 3.00 168 151 67 125 1 20 47 c/6032-28 t494c476(m)020a(2) 9.4 10.0 0.80 371 334 148 125 1 20 47 d/7343-31 t494d476(1)020a(2) 9.4 6.0 0.20 866 779 346 125 1 20 68 x/7343-43 t494x686(1)020a(2) 13.6 6.0 0.20 908 817 363 125 1 20 68 d/7343-31 t494d686(1)020a(2) 13.6 8.0 0.20 866 779 346 125 1 20 68 c/6032-28 t494c686(1)020a(2) 13.6 8.0 0.38 542 488 217 125 1 20 100 d/7343-31 t494d107(1)020a(2) 20.0 6.0 0.68 471 424 188 125 1 20 100 x/7343-43 t494x107(1)020a(2) 20.0 8.0 0.15 1049 944 420 125 1 20 100 e/7360-38 t494e107(1)020a(2) 20.0 8.0 0.30 816 734 326 125 1 20 150 x/7343-43 t494x157(1)020a(2) 30.0 10.0 0.30 742 668 297 125 1 25 0.33 a/3216-18 t494a334(1)025a(2) 0.5 4.0 10.0 87 78 35 125 1 25 0.47 a/3216-18 t494a474(1)025a(2) 0.5 4.0 9.0 91 82 36 125 1 25 0.68 a/3216-18 t494a684(1)025a(2) 0.5 4.0 6.0 112 101 45 125 1 25 1 b/3528-21 t494b105(1)025a(2) 0.5 4.0 2.0 206 185 82 125 1 25 1 a/3216-18 t494a105(1)025a(2) 0.5 4.0 4.0 137 123 55 125 1 25 1.5 b/35 2 8-21 t494b155(1)025a(2) 0.5 6.0 1.5 238 214 95 125 1 25 1.5 a/3216-18 t494a155(1)025a(2) 0.5 6.0 3.0 158 142 63 125 1 25 2.2 c/6032-28 t494c225(1)025a(2) 0.6 6.0 2.2 224 202 90 125 1 25 2.2 b/3528-21 t494b225(1)025a(2) 0.6 6.0 1.2 266 239 106 125 1 25 2.2 a/3216-18 t494a225(1)025a(2) 0.6 6.0 3.0 158 142 63 125 1 25 3.3 c/6032-28 t494c335(1)025a(2) 0.8 6.0 1.2 303 273 121 125 1 25 3.3 b/3528-21 t494b335(1)025a(2) 0.8 6.0 2.0 206 185 82 125 1 25 3.3 a/3216-18 t494a335(1)025a(2) 0.8 6.0 3.0 158 142 63 125 1 25 4.7 c/6032-28 t494c475(1)025a(2) 1.2 6.0 0.6 428 385 171 125 1 25 4.7 b/3528-21 t494b475(1)025a(2) 1.2 6.0 1.0 292 263 117 125 1 25 4.7 a/3216-18 t494a475(m)025a(2) 1.2 8.0 3.0 158 142 63 125 1 25 6.8 c/6032-28 t494c685(1)025a(2) 1.7 6.0 0.6 428 385 171 125 1 vdc at 85oc f kemet/eia (see below for part options) a at 20oc max/5 min % at 20oc 120 hz max at 20oc 100 khz max ma at 25oc 100 khz ma at 85oc 100 khz ma at 125oc 100 khz oc refow temp 260oc rated voltage rated cap case code/ case size kemet part number dc leakage df esr maximum allowable ripple current maximum operating temp msl tantalum surface mount capacitors C low esr t494 series industrial grade mno 2
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t20 08_t494 ? 10/21/2016 11 11 table 1 C ratings & part number reference cont'd (1) to complete kemet part number, insert m for 20% or k for 10%. designates capacitance tolerance. (2) to complete kemet part number, insert t = 100% matte tin (sn) plated, g = gold plated, h = standard solder coated (snpb 5% pb minimum). designates termination fnish. refer to ordering information for additional detail. higher voltage ratings and tighter tolerance product including esr may be substituted within the same size at kemet's option. voltage substitution will be marked with the higher voltage rating. substitutions can include better than series. rated voltage rated cap case code/ case size kemet part number dc leakage df esr maximum allowable ripple current maximum operating temp msl vdc at 85oc f kemet/eia (see below for part options) a at 20oc max/5 min % at 20oc 120 hz max at 20oc 100 khz max ma at 25oc 100 khz ma at 85oc 100 khz ma at 125oc 100 khz oc refow temp 260oc 25 6.8 b/3528-21 t494b685(1)025a(2) 1.7 8.0 2.0 206 185 82 125 1 25 10 d/7343-31 t494d106(1)025a(2) 2.5 6.0 0.4 612 551 245 125 1 25 10 c/6032-28 t494c106(1)025a(2) 2.5 6.0 0.6 428 385 171 125 1 25 10 b/3528-21 t494b106(1)025a(2) 2.5 8.0 3.0 168 151 67 125 1 25 15 d/7343-31 t494d156(1)025a(2) 3.8 6.0 0.35 655 590 262 125 1 25 15 c/6032-28 t494c156(1)025a(2) 3.8 6.0 0.90 350 315 140 125 1 25 15 b/3528-21 t494b156(1)025a(2) 3.8 8.0 3.00 168 151 67 125 1 25 22 d/7343-31 t494d226(1)025a(2) 5.5 6.0 0.3 707 636 283 125 1 25 22 c/6032-28 t494c226(1)025a(2) 5.5 6.0 1.0 332 299 133 125 1 25 22 v/7343-20 t494v226(1)025a(2) 5.5 6.0 0.5 500 450 200 125 1 25 33 x/7343-43 t494x336(1)025a(2) 8.3 6.0 0.3 742 668 297 125 1 25 33 d/7343-31 t494d336(1)025a(2) 8.3 6.0 0.4 612 551 245 125 1 25 33 c/6032-28 t494c336(1)025a(2) 8.3 10.0 1.0 332 299 133 125 1 25 47 x/7343-43 t494x476(1)025a(2) 11.8 6.0 0.3 742 668 297 125 1 25 47 d/7343-31 t494d476(1)025a(2) 11.8 10.0 0.2 866 779 346 125 1 25 68 x/7343-43 t494x686(m)025a(2) 17.0 8.0 0.3 742 668 297 125 1 25 68 d/7343-31 t494d686(m)025a(2) 17.0 10.0 0.5 548 493 219 125 1 25 100 x/7343-43 t494x107(m)025a(2) 25.0 8.0 0.25 812 731 325 125 1 35 0.1 a/3216-18 t494a104(1)035a(2) 0.5 4.0 10.0 87 78 35 125 1 35 0.15 a/3216-18 t494a154(1)035a(2) 0.5 4.0 6.0 112 101 45 125 1 35 0.22 a/3216-18 t494a224(1)035a(2) 0.5 4.0 6.0 112 101 45 125 1 35 0.33 a/3216-18 t494a334(1)035a(2) 0.5 4.0 6.0 112 101 45 125 1 35 0.47 b/3528-21 t494b474(1)035a(2) 0.5 4.0 2.5 184 166 74 125 1 35 0.47 a/3216-18 t494a474(1)035a(2) 0.5 4.0 4.0 137 123 55 125 1 35 0.68 b/3528-21 t494b684(1)035a(2) 0.5 4.0 2.5 184 166 74 125 1 35 0.68 a/3216-18 t494a684(1)035a(2) 0.5 4.0 6.0 112 101 45 125 1 35 1 b/3528-21 t494b105(1)035a(2) 0.5 4.0 2.0 206 185 82 125 1 35 1 a/3216-18 t494a105(1)035a(2) 0.5 4.0 6.0 112 101 45 125 1 35 1.5 a/3216-18 t494a155(1)035a(2) 0.5 6.0 4.0 137 123 55 125 1 35 1.5 c/6032-28 t494c155(1)035a(2) 0.5 6.0 2.5 210 189 84 125 1 35 1.5 b/3528-21 t494b155(1)035a(2) 0.5 6.0 3.0 168 151 67 125 1 35 2.2 a/3216-18 t494a225(1)035a(2) 0.8 6.0 3.0 158 142 63 125 1 35 2.2 c/6032-28 t494c225(1)035a(2) 0.8 6.0 1.5 271 244 108 125 1 35 2.2 b/35 2 8-21 t494b225(1)035a(2) 0.8 6.0 2.5 184 166 74 125 1 35 3.3 c/6032-28 t494c335(1)035a(2) 1.2 6.0 0.8 371 334 148 125 1 35 3.3 b/3528-21 t494b335(1)035a(2) 1.2 6.0 1.3 256 230 102 125 1 35 4.7 b/3528-21 t494b475(1)035a(2) 1.6 6.0 1.5 238 214 95 125 1 35 4.7 d/7343-31 t494d475(1)035a(2) 1.6 6.0 0.7 463 417 185 125 1 35 4.7 c/6032-28 t494c475(1)035a(2) 1.6 6.0 0.7 396 356 158 125 1 35 6.8 d/7343-31 t494d685(1)035a(2) 2.4 6.0 0.5 548 493 219 125 1 35 6.8 c/6032-28 t494c685(1)035a(2) 2.4 6.0 0.9 350 315 140 125 1 35 10 d/7343-31 t494d106(1)035a(2) 3.5 6.0 0.4 612 551 245 125 1 35 10 c/6032-28 t494c106(1)035a(2) 3.5 6.0 1.2 303 273 121 125 1 35 10 v/7343-20 t494v106(1)035a(2) 3.5 6.0 0.8 395 356 158 125 1 35 15 x/7343-43 t494x156(1)035a(2) 5.3 6.0 0.30 742 668 297 125 1 vdc at 85oc f kemet/eia (see below for part options) a at 20oc max/5 min % at 20oc 120 hz max at 20oc 100 khz max ma at 25oc 100 khz ma at 85oc 100 khz ma at 125oc 100 khz oc refow temp 260oc rated voltage rated cap case code/ case size kemet part number dc leakage df esr maximum allowable ripple current maximum operating temp msl tantalum surface mount capacitors C low esr t494 series industrial grade mno 2
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t20 08_t494 ? 10/21/2016 12 12 table 1 C ratings & part number reference cont'd (1) to complete kemet part number, insert m for 20% or k for 10%. designates capacitance tolerance. (2) to complete kemet part number, insert t = 100% matte tin (sn) plated, g = gold plated, h = standard solder coated (snpb 5% pb minimum). designates termination fnish. refer to ordering information for additional detail. higher voltage ratings and tighter tolerance product including esr may be substituted within the same size at kemet's option. voltage substitution will be marked with the higher voltage rating. substitutions can include better than series. rated voltage rated cap case code/ case size kemet part number dc leakage df esr maximum allowable ripple current maximum operating temp msl vdc at 85oc f kemet/eia (see below for part options) a at 20oc max/5 min % at 20oc 120 hz max at 20oc 100 khz max ma at 25oc 100 khz ma at 85oc 100 khz ma at 125oc 100 khz oc refow temp 260oc 35 15 d/7343-31 t494d156(1)035a(2) 5.3 6.0 0.35 655 590 262 125 1 35 22 x/7343-43 t494x226(1)035a(2) 7.7 6.0 0.3 742 668 297 125 1 35 22 d/7343-31 t494d226(1)035a(2) 7.7 6.0 0.4 612 551 245 125 1 35 33 d/7343-31 t494d336(1)035a(2) 11.6 6.0 0.6 500 450 200 125 1 35 33 x/7343-43 t494x336(1)035a(2) 11.6 6.0 0.6 524 472 210 125 1 35 47 x/7343-43 t494x476(1)035a(2) 16.5 8.0 0.5 574 517 230 125 1 35 47 e/7360-38 t494e476(1)035a(2) 16.5 10.0 0.3 816 734 326 125 1 50 0.1 a/3216-18 t494a104(1)050a(2) 0.5 4.0 10.0 87 78 35 125 1 50 0.15 a/3216-18 t494a154(1)050a(2) 0.5 4.0 10.0 87 78 35 125 1 50 0.22 a/3216-18 t494a224(1)050a(2) 0.5 4.0 12.0 79 71 32 125 1 50 0.22 b/3528-21 t494b224(1)050a(2) 0.5 4.0 10.0 92 83 37 125 1 50 0.33 a/3216-18 t494a334(1)050a(2) 0.5 4.0 9.0 91 82 36 125 1 50 0.33 b/3528-21 t494b334(1)050a(2) 0.5 4.0 2.5 184 166 74 125 1 50 0.47 a/3216-18 t494a474(1)050a(2) 0.5 4.0 6.0 112 101 45 125 1 50 0.47 c/6032-28 t494c474(1)050a(2) 0.5 4.0 1.8 247 222 99 125 1 50 0.47 b/3528-21 t494b474(1)050a(2) 0.5 4.0 2.0 206 185 82 125 1 50 0.68 a/3216-18 t494a684(1)050a(2) 0.5 4.0 5.0 122 110 49 125 1 50 0.68 c/6032-28 t494c684(1)050a(2) 0.5 4.0 1.6 262 236 105 125 1 50 0.68 b/3528-21 t494b684(1)050a(2) 0.5 4.0 3.0 168 151 67 125 1 50 1 a/3216-18 t494a105(1)050a(2) 0.5 4.0 5.0 122 110 49 125 1 50 1 c/6032-28 t494c105(1)050a(2) 0.5 4.0 1.6 262 236 105 125 1 50 1 b/3528-21 t494b105(1)050a(2) 0.5 6.0 4.0 146 131 58 125 1 50 1 v/7343-20 t494v105(m)050a(2) 0.5 4.0 4.0 177 159 71 125 1 50 1.5 d/7343-31 t494d155(1)050a(2) 0.8 6.0 1.0 387 348 155 125 1 50 1.5 c/6032-28 t494c155(1)050a(2) 0.8 6.0 1.5 271 244 108 125 1 50 2.2 d/7343-31 t494d225(1)050a(2) 1.1 6.0 0.8 433 390 173 125 1 50 2.2 c/6032-28 t494c225(1)050a(2) 1.1 6.0 1.5 271 244 108 125 1 50 3.3 d/7343-31 t494d335(1)050a(2) 1.7 6.0 0.8 433 390 173 125 1 50 4.7 d/7343-31 t494d475(1)050a(2) 2.4 6.0 0.6 500 450 200 125 1 50 6.8 x/7343-43 t494x685(1)050a(2) 3.4 6.0 0.5 574 517 230 125 1 50 6.8 d/7343-31 t494d685(1)050a(2) 3.4 6.0 0.7 463 417 185 125 1 50 10 x/7343-43 t494x106(1)050a(2) 5.0 6.0 0.4 642 578 257 125 1 50 10 d/7343-31 t494d106(1)050a(2) 5.0 6.0 0.7 463 417 185 125 1 50 15 x/ 7 343-43 t494x156(1)050a(2) 7.5 6.0 0.4 642 578 257 125 1 50 22 x/7343-43 t494x226(1)050a(2) 11.0 10.0 0.5 574 517 230 125 1 vdc at 85oc f kemet/eia (see below for part options) a at 20oc max/5 min % at 20oc 120 hz max at 20oc 100 khz max ma at 25oc 100 khz ma at 85oc 100 khz ma at 125oc 100 khz oc refow temp 260oc rated voltage rated cap case code/ case size kemet part number dc leakage df esr maximum allowable ripple current maximum operating temp msl tantalum surface mount capacitors C low esr t494 series industrial grade mno 2
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t20 08_t494 ? 10/21/2016 13 13 recommended voltage derating guidelines ?55c to 85c 85 c to 12 5c % change in working dc voltage with temperature v r 67% of v r recommended maximum application voltage 50% of v r 33% of v r ripple current/ripple voltage permissible ac ripple voltage and current are related to equivalent series resistance (esr) and the power dissipation capabilities of the device. permissible ac ripple voltage which may be applied is limited by two criteria: 1. th e positive peak ac voltage plus the dc bias voltage, if any, must not exceed the dc voltage rating of the capacitor. 2. th e negative peak ac voltage in combination with bias voltage, if any, must not exceed the allowable limits specifed fo r re verse vo ltage. se e the re verse vo ltage sect ion for allowable limits. the maximum power dissipation by case size can be determined using the table at right. the maximum power dissipation rating stated in the table must be reduced with increasing environmental operating temperatures. refer to the table below for temperature compensation requirements. temperature compensation multipliers for maximum ripple current t 25c t 85c t 125c t environmental temperature the maximum power dissipation rating must be reduced with increasing environmental operating temperatures. refer to the temperature compensation multiplier table for details. kemet case code eia case code maximum power dissipation (p max) mwatts at 25c w/+20c rise a 3216C18 75 b 3528C21 85 c 6032C28 110 d 7343C31 150 x 7343C43 165 e 7360C38 200 s 3216C12 60 t 3528C12 70 u 6032C15 90 v 7343C20 125 t510x 7343C43 270 t510e 7360C38 285 using the p max of the device, the maximum allowable rms ripple current or voltage may be determined. -qe4qe6 )qe4qe6 -vqwvmttpigyvvirxeqtiviw )vqwvmttpizspxekizspxw 4qeqemqyqtsivhmwwmtexmsrexxw 6)76exwtigmihjviuyirgslqw -qtihergiexwtigmihjviuyirgslqw 0% 20% 40% 60% 80% 100% 120% ? 55 25 85 125 % working voltage % change in working dc voltage with temperature temperature (oc) 67% 33% recommended maximum application voltage (as % of rated voltage) tantalum surface mount capacitors C low esr t494 series industrial grade mno 2
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t20 08_t494 ? 10/21/2016 14 14 reverse voltage solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. the positive terminal is identifed on the capacitor body by a stripe plus in some cases a bev eled edge. a small degree of transient r everse voltage is permissible for short periods per the table. the capacitors should not be operated continuously in reverse mode, even within these limits. temperature permissible transient reverse voltage 25c 15% of rated voltage 85c 5% of rated voltage 125c 1% of rated voltage 8epii0erh(mqirwmsrw'syvxevh /)1)8 1ixvmg 7mi 'shi (irwmx0izip% maximum (most) land protrusion (mm) density level b: median (nominal) land protrusion (mm) density level c: minimum (least) land protrusion (mm) case eia w l s v2 l s v2 l s v2 a 3216C18 1.35 2.20 0.62 6.02 2.80 1.23 1.80 0.82 4.92 2.30 1.13 1.42 0.98 4.06 2.04 b 3528C21 2.35 2.21 0.92 6.32 4.00 2.23 1.80 1.12 5.22 3.50 2.13 1.42 1.28 4.36 3.24 c 6032C25 2.35 2.77 2.37 8.92 4.50 2.23 2.37 2.57 7.82 4.00 2.13 1.99 2.73 6.96 3.74 d 7343C31 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 e 1 7360C38 4.25 2.77 3.67 10.22 7.30 4.13 2.37 3.87 9.12 6.80 4.03 1.99 4.03 8.26 6.54 s 2 3216C12 1.35 2.20 0.62 6.02 2.80 1.23 1.80 0.82 4.92 2.30 1.13 1.42 0.98 4.06 2.04 t 3528C12 2.35 2.20 0.92 6.32 4.00 2.23 1.80 1.12 5.22 3.50 2.13 1.42 1.28 4.36 3.24 u 6032C15 2.35 2.77 2.37 8.92 4.50 2.23 2.37 2.57 7.82 4.00 2.13 1.99 2.73 6.96 3.74 v 7343C20 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 x 1 7343C43 2.55 2.77 3.67 10.22 5.60 2.43 2.37 3.87 9.12 5.10 2.33 1.99 4.03 8.26 4.84 density level a: solder processes. density level b: ll density level c: lllll li lll l s w w l v1 v2 grid placement courtyard tantalum surface mount capacitors C low esr t494 series industrial grade mno 2
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t20 08_t494 ? 10/21/2016 15 15 soldering process kemets families of surface mount capacitors are compatible with wave (single or dual), conv ection, ir, or vapor phase refow techniques. preheating of these components is recommended to a void extreme thermal stress. kemet's recommended profle conditions for convection and ir refow refect the profle conditions of the ipc/jCstdC020d standard for moisture sensitivity testing. the devices can safely withstand a maximum of three refow passes at these conditions. please note that although the x/7343C43 case size can withstand wav e soldering, the tall profle (4.3 mm maximum) dictates care in wav e process development. hand soldering should be performed with care due to the diffculty in process control. if performed, care should be taken to a void contact of the soldering iron to the molded case. the iron should be used to heat the solder pad, applying solder between the pad and the termination, until refow occurs. once refow occurs, the iron should be remo ved immediately. wiping the edges of a chip and heating the top sur face is not recommended. during typical refow operations, a slight darkening of the gold-colored epoxy ma y be observed. this slight darkening is normal and not harmful to the product. marking permanency is not affected by this change. profle feature snpb assembly pb-free assembly preheat/soak temperature minimum (t smin ) 100c 150c temperature maximum (t smax ) 150c 200c time (t s ) from t smin to t smax ) 60 C 120 seconds 60 C 120 seconds ramp-up rate (t l to t p ) 3c/seconds maxim um 3c/seconds maxim um liquidous temperature (t l ) 183c 217c time above liquidous (t l ) 60 C 150 seconds 60 C 150 seconds peak temperature (t p ) 220c* 235c** 250c* 260c** time within 5c of maximum peak temperature (t p ) 20 seconds maximum 30 seconds maximum ramp-down rate (t p to t l ) 6c/seconds maxim um 6c/seconds maxim um time 25c to peak temperature 6 minutes maximum 8 minutes maximum 2sxi%ppxiqtivexyviwvijivxsxligirxivsjxlitegoekiqiewyvihsrxli tegoekishwyvjegixlexmwjegmrkythyvmrkewwiqpvis 'ewi7mi()4=erh 'ewi7mi%&',-/16789:erh storage tantalum chip capacitors should be stored in normal working environments. while the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. in addition, packaging materials will be degraded by high temperatureCreels may soften or warp and tape peel force may increase. kemet recommends that maximum stor age temperatur e not exceed 40oc and maximum storage humidity not exceed 60% relativ e humidity. temperatur e fuctuations should be minimized to av oid condensation on the parts and atmospheres should be free of chlorine and sulphur bearing compounds. for optimized solderability chip stock should be used promptly, pr eferably within three years of receipt. time te mp erature t smin 25 t smax t l t p maximum ramp up rate = 3oc/sec maximum ramp down rate = 6oc/sec t p t l t s 25oc to peak tantalum surface mount capacitors C low esr t494 series industrial grade mno 2
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t20 08_t494 ? 10/21/2016 16 16 construction leadframe (? cathode) leadframe (+ anode) tantalum wire molded epoxy case molded epoxy case polarity bevel (+) weld (to attach wire) silver adhesive washer polarity stripe (+) detailed cross section tantalum wire tantalum ta 2 o 5 dielectric (first layer) carbon (third layer) silver paint (fourth layer) washer mno 2 (second layer) capacitor marking * 230 = 30 th week of 2012 polarity indicator (+) rated voltage picofarad code kemet id date code* date code * 1 st digit = last number of year 2 = 2012 3 = 2013 4 = 2014 5 = 2015 6 = 2016 7 = 2017 2 nd and 3 rd digit = week of the year 01 = 1 st week of the year to 52 = 52 nd week of the year tantalum surface mount capacitors C low esr t494 series industrial grade mno 2
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t20 08_t494 ? 10/21/2016 17 17 tape & reel packaging information kemets molded chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with eia standard 481 : embossed carrier taping of surface mount components for automatic handling. this packaging system is compatible with all tape-fed automatic pick-and-place systems. table 3 C packaging quantity case code tape width (mm) 7" reel* 13" reel* kemet eia s 3216-12 8 2,500 10,000 t 3528-12 8 2,500 10,000 m 3528-15 8 2,000 8,000 u 6032-15 12 1,000 5,000 l 6032-19 12 1,000 3,000 w 7343-15 12 1,000 3,000 z 7343-17 12 1,000 3,000 v 7343-20 12 1,000 3,000 a 3216-18 8 2,000 9,000 b 3528-21 8 2,000 8,000 c 6032-28 12 500 3,000 d 7343-31 12 500 2,500 q 7343-12 12 1,000 3,000 y 7343-40 12 500 2,000 x 7343-43 12 500 2,000 e/t428p 7360-38 12 500 2,000 h 7360-20 12 1,000 2,500 2s'7tigviuymvihjsvviiptegoekmrk'viuymvihjsvviiptegoekmrk top tape thickness 0.10 mm (0.004") maximum thickness 8 mm (0.315") or 12 mm (0.472") 180 mm (7.0") or 330 mm (13.0") tantalum surface mount capacitors C low esr t494 series industrial grade mno 2
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t20 08_t494 ? 10/21/2016 18 18 figure 1 C embossed (plastic) carrier tape dimensions po t f w cent er line s of ca vity ao bo user direction of unre eling cover tape ko b 1 is for tape feeder reference only, including dra ft concentric abou t b o . t 2 ?d 1 ?do b 1 s 1 t 1 e 1 e 2 p 1 p 2 embossment for c avity size, see note 1 table 4 [10 pitches cumulative tolerance on tape 0.2 mm] 8efpii)qfswwih4pewxmg 'evvmiv8eti(mqirwmsrw metric will govern constant dimensions millimeters (inches) tape size d 0 d 1 minimum note 1 e 1 p 0 p 2 r reference note 2 s 1 minimum note 3 t maximum t 1 maximum 8 mm 1.5+0.10/?0.0 (0.059+0.004/?0.0) 1.0 (0.039) 1.750.10 (0.0690.004) 4.00.10 (0.1570.004) 2.00.05 (0.0790.002) 25.0 (0.984) 0.600 (0.024) 0.600 (0.024) 0.100 (0.004) 12 mm 1.5 (0.059) 30 (1.181) 16 mm 2.00.1 (0.0790.059) 8liiqswwqirxlspipsgexmsrwleppiqiewyvihjvsqxliwtvsgoixlspigsrxvsppmrkxlipsgexmsrsjxliiqswwqirx(mqirwmsrwsjiqswwqirx psgexmsrerhlspipsgexmsrwleppiettpmihmrhitirhirxsjieglsxliv 8lixetimxlsvmxlsyxgsqtsrirxwwlepptewwevsyrh6mxlsyxheqekiwii*mkyvi -j7 1 liieriirkleieieiiieiiiereieekelir 1 dimension is a reference dimension for tape feeder clearance only. lieiri and k lerlirirlirieerile eliriririeilieilieiei lirireriiiliereieirlilereireiliieileiirii erliririeereiereeiii*ki eieiirliririieerieiereeiii *ki iiiirrereiereierkiiierkiiir variable dimensions millimeters (inches) tape size pitch b 1 maximum note 4 e 2 minimum f p 1 t 2 maximum w maximum a 0 , b 0 & k 0 8 mm single (4 mm) 4.35 (0.171) 6.25 (0.246) 3.50.05 (0.1380.002) 2.00.05 or 4.00.10 (0.0790.002 or 0.1570.004) 2.5 (0.098) 8.3 (0.327) note 5 12 mm single (4 mm) & double (8 mm) 8.2 (0.323) 10.25 (0.404) 5.50.05 (0.2170.002) 2.00.05 (0.0790.002) or 4.00.10 (0.1570.004) or 8.00.10 (0.315 0.004) 4.6 (0.181) 12.3 (0.484) 16 mm triple (12 mm) 12.1 (0.476) 14.25 (0.561) 7.5 0.10 (0.2950.004) 4.00.10 (0.1570.004) to 12.00.10 (0.4720.004) 8.0 (0.315) 16.3 (0.642) tantalum surface mount capacitors C low esr t494 series industrial grade mno 2
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t20 08_t494 ? 10/21/2016 19 19 packaging information performance notes 1. cover tape break force: 1.0 kg minimum. 2. cover tape peel strength: the total peel strength of the cover tape from the carrier tape shall be: tape width peel strength 8 mm 0.1 to 1.0 newton (10 to 100 gf) 12 and 16 mm 0.1 to 1.3 newton (10 to 130 gf) the direction of the pull shall be opposite the direction of the carrier tape travel. the pull angle of the carrier tape shall be 165 to 180 from the plane of the carrier tape. during peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 10 mm/minute. 3. labeling: bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. refer to eia ereer . figure 2 C maximum component rotation ao bo t s max imum c ompon en t rota ti on t op view maxi mum co mponent rotat ion s id e view tape m ax imum width (mm) r otat io n ( t ) 8,12 20 16 ? 200 10 tap e m aximum wid th ( mm) ro tat ion ( s ) 8,12 20 16 ? 56 10 72 ? 200 5 typical pocke t center line typical com po nent centerline figure 3 C maximum lateral movement 0.5 mm maxi mum 0.5 mm maxi mum 8 mm & 1 2 mm tap e 1.0 mm maxi mum 1.0 mm maxi mum 1 6 mm tape figure 4 C bending radius r r b en ding radius e mbo sse d carrier p unc hed ca rrier tantalum surface mount capacitors C low esr t494 series industrial grade mno 2
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t20 08_t494 ? 10/21/2016 20 20 figure 5 C reel dimensions a d (see note) full radi us, see note b (see note) access hole at slot location (? 40 mm minimum) if present, tape slot in core for t ap e start: 2.5 mm minimum width x 10.0 mm minimum depth w3 (includes flange distortion at outer edge) w2 (m ea sured at hu b) w1 (m ea sured at hu b) c (arbor hole diameter) note: drive spokes optional; if used, dimensions b and d shall apply. n 8efpii6iip(mqirwmsrw metric will govern constant dimensions millimeters (inches) tape size a b minimum c d minimum 8 mm 1780.20 (7.0080.008) or 3300.20 (13.0000.008) 1.5 (0.059) 13.0+0.5/?0.2 (0.521+0.02/?0.008) 20.2 (0.795) 12 mm 16 mm variable dimensions millimeters (inches) tape size n minimum w 1 w 2 maximum w 3 8 mm 50 (1.969) 8.4+1.5/?0.0 (0.331+0.059/?0.0) 12.4+2.0/?0.0 (0.488+0.078/?0.0) 16.4+2.0/?0.0 (0.646+0.078/?0.0) tantalum surface mount capacitors C low esr t494 series industrial grade mno 2
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t20 08_t494 ? 10/21/2016 21 21 figure 6 C tape leader & trailer dimensions trailer 16 0 mm minimum carrier t ape end start rou nd sp rock et holes el ongated spro ck et holes ( 32 mm tape and wi de r) t op co ve r t ape top c ove r t ape p unche d carrier 8 mm & 12 mm only e mboss ed carrier components 100 mm minimum leader 400 mm minimum figure 7 C maximum camber carrier tape round sprocket holes 1 mm ma ximum , either direction straight edge 250 mm elongated sprocket holes (32 mm & wider ta pe s) tantalum surface mount capacitors C low esr t494 series industrial grade mno 2
? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 ? 864-963-6300 ? www.kemet.com t20 08_t494 ? 10/21/2016 22 22 kemet electronic corporation sales off ces for a complete list of our global sales off ces, please visit www.kemet.com/sales. disclaimer all product specif cations, statements, information and data (collectively, the information) in this datasheet are subject to change. the customer is responsible for checking and verifying the extent to which the information contained in this publication is applicable to an order at the time the order is placed. all information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. statements of suitability for certain applications are based on kemet electronics corporations (kemet) knowledge of typical operating conditions for such applications, but are not intended to constitute C and kemet specif cally disclaims C any warranty concerning suitability for a specif c customer application or use. the information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice inferred from this information or otherwise provided by kemet with reference to the use of kemets products is given gratis, and kemet assumes no obligation or liability for the advice given or results obtained. although kemet designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. although all productCrelated warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. /)1)8mwevikmwxivihxvehiqevosj/)1)8)pigxvsrmgw'svtsvexmsr tantalum surface mount capacitors C low esr t494 series industrial grade mno 2

▲Up To Search▲

Price & Availability of T494E336K2R5AH7280

	To Download T494E336K2R5AH7280 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .